Safety electronic systems

>>Safety electronic systems
Safety electronic systems2018-07-25T14:40:29+00:00

Index Marine manufactures a range of products for use in boats and other applications requiring detection of water and monitoring of pumps:


Galvanic Isolators

  • IM2160A16 – 16Amp galvanic isolator

    16Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.

    Download Technical Data Sheets
    Download Installation Guide

    £60.00 ex. VAT
    Add to basket Details
  • IM2160A32 – 32Amp galvanic isolator

    32Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.

    Download Technical Data Sheets
    Download Installation Guide

    £70.00 ex. VAT
    Add to basket Details
  • IM2160A70 – 70Amp galvanic isolator

    70Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.

    Download Technical Data Sheets
    Download Installation Guide

    £120.00 ex. VAT
    Add to basket Details
  • IM2200 – Electrical status/fault indicator

    Provides a monitoring LED light panel, which can indicate problems with the vessels’ earthing system and any AC or DC fault conditions alerting you to shut down electrics immediately and seek a professional electrician for advice.

    Download Technical Data Sheets
    Download Installation Guide

    £19.00 ex. VAT
    Add to basket Details


Safety electronic systems – alarm and control panels

  • BE10 pump control panel

    When coupled with BE51/BE55 optical and resistive fluid sensors, float switches and capacitance level sensors, the BE10 Electronic Pump Control Unit provides automatic pump running to ensure there is no dangerous build up of water or fluids, making it ideal for use in working boats as well as land-based applications where water ingress is a problem.

    Download Installation Guide

    £179.00 ex. VAT
    Add to basket Details
  • BE15 4 station bilge alarm

    A rugged and straightforward solution to alerting users of working, military and special use boats to the presence of water in the boat’s bilges, the BE15 is a sealed unit that is easy to install, and provides reassurance on busy active boats.

    Download Installation Guide

    £269.00 ex. VAT
    Add to basket Details
  • BE16 4 station alarm panel – general purpose

    Monitoring up to 4 zones and compatible with Index Marine BE51/BE55 optical and resistive fluid sensors as well as third party sensor types, the BE16 offers low power consumption for indoor stations monitoring water level and other inputs. It is ideal for use in building and infrastructure flood alert systems.

    Download Installation Guide

    £225.00 ex. VAT
    Add to basket Details
  • BE18 waterproof 4 station alarm panel

    Ruggedised and splashproof, the BE18 monitors up to 4 zones and can be used with BE51/BE55 optical and resistive fluid sensors as well as third party sensor types to alert to any combination of water ingress, gas presence, hatch and door security, or many other sensor inputs. This is a robust, versatile alarm panel that serves a wide range of uses in boats, vehicles, architectural and industrial applications.

    Download Installation Guide

    £249.00 ex. VAT
    Add to basket Details
  • BE20 – water ingress alarm – dual station level alarm

    Designed to monitor high or low levels of liquids, the BE20 has two channels with audio alarm and independent annunciator lights. It is ideal for monitoring water ingress in boat bilges and compartments, and buildings and infrastructure in flood-prone areas. Compatible with Index Marine BE51/BE55 optical and resistive fluid sensors as well as many other third party sensor types.

    Download Installation Guide

    £149.00 ex. VAT
    Add to basket Details
  • 2805 Exhaust Temperature Sensor (with 1 sensor)

    This small and simple panel mount device gives an audible and visual alarm should the exhaust temperature rise due to pump failure or water blockage. The system is suitable for 12 or 24v operation and is supplied with one 90°C sensor (other sensor values are available if required) with 5m of connecting cable. Built-in test assure the user of correct operation.

    Download Installation Guide

    £105.00 ex. VAT
    Add to basket Details
  • 2806 Exhaust Temperature Sensor (with 2 sensors)

    This small and simple panel mount device gives an audible and visual alarm should the exhaust temperature rise due to pump failure or water blockage. The system is suitable for twin engine boats with 12 or 24v operation and is supplied with two 90°C sensors (other sensor values are available if required) with 5m of connecting cable. Built-in test assure the user of correct operation.

    Download Installation Guide

    £120.00 ex. VAT
    Add to basket Details


Sensors

  • BE51 bilge sensor/optical sensor (10m cable)

    With 10m of cable, this optical sensor is compatible with all Index Marine alarm panels, and is safe for use in the presence of volatile gases. An output triggers when the probe becomes immersed in water.

    Download Installation Guide

    £119.00 ex. VAT
    Add to basket Details
  • BE55 resistive sensor

    With 10m of cable, this resistive sensor is compatible with all Index Marine alarm panels, but can be used in many other applications. An output triggers when the probe becomes immersed in water.

    Download Installation Guide

    £45.00 ex. VAT
    Add to basket Details