70Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.
70Amp galvanic isolator – 2160A70
£120.00 ex. VAT
Prevents galvanic corrosion caused by galvanic current flow. The 2160A70 galvanic isolator works by placing a rectifier network between the earth connection the boat and shore-based mains power supply. This stops the small continuous electrical currents that are generated by galvanic reactions between the various metals in contact with one another and the water which can cause rapid and heavy corrosion of underwater metalwork.
Variants are available to cater for 16Amp, 32 Amp and 70 Amp shore and vessel electrical systems. The appropriate variant should be installed in-line in the earth cable between where shore power enters the boat and the vessels electrical distribution panel. All vessels will benefit from the installation of a correctly installed galvanic isolator, and many marinas make their use mandatory.
Galvanic Isolators are also known as zinc savers.
|Dimensions||194 × 77 × 85 mm|
|Max continuous current*||
100A – Maximum continuous power can flow for 25 minutes for the IM2160/70 model
|Max surge current||
|Operating temperature range||
-55 – 150°C