Flood and exhaust safety electronic systems Archives

Index Marine manufactures a range of products for use in boats and other applications requiring detection of water and monitoring of pumps:

Water level detectors and alarm panels
Exhaust temperature detectors and alarms
Galvanic isolators

Float switch (1)
Galvanic Isolators (4)
Safety electronic systems – Alarm and Control Panels (7)
Sensors (2)
16Amp galvanic isolator – 2160A16

16Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.

Download Technical Data Sheets
Download Installation Guide

£72.00 ex. VAT

Add to basket Details
32Amp galvanic isolator – 2160A32

32Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.

Download Technical Data Sheets
Download Installation Guide

£90.00 ex. VAT

Add to basket Details
70Amp galvanic isolator – 2160A70

70Amp galvanic isolators play a key role in the prevention of expensive and potentially dangerous corrosive damage to metalwork on boats in contact with water such as hulls, rudders, propellors, shafts and tubes.

Download Technical Data Sheets
Download Installation Guide

£120.00 ex. VAT

Add to basket Details
Electrical status/fault indicator – 2200

Provides a monitoring LED light panel, which can indicate problems with the vessels’ earthing system and any AC or DC fault conditions alerting you to shut down electrics immediately and seek a professional electrician for advice.

Download Technical Data Sheets
Download Installation Guide

£22.00 ex. VAT

Add to basket Details
2805 Exhaust Temperature Sensor (with 1 sensor)

This small and simple panel mount device gives an audible and visual alarm should the exhaust temperature rise due to pump failure or water blockage. The system is suitable for 12 or 24v operation and is supplied with one 90°C sensor (other sensor values are available if required) with 5m of connecting cable. Built-in test assure the user of correct operation.

Download Installation Guide

£105.00 ex. VAT

Add to basket Details
2806 Exhaust Temperature Sensor (with 2 sensors)

This small and simple panel mount device gives an audible and visual alarm should the exhaust temperature rise due to pump failure or water blockage. The system is suitable for twin engine boats with 12 or 24v operation and is supplied with two 90°C sensors (other sensor values are available if required) with 5m of connecting cable. Built-in test assure the user of correct operation.

Download Installation Guide

£120.00 ex. VAT

Add to basket Details
BE10 pump control panel

When coupled with BE51/BE55 optical and resistive fluid sensors, float switches and capacitance level sensors, the BE10 Electronic Pump Control Unit provides automatic pump running to ensure there is no dangerous build up of water or fluids, making it ideal for use in working boats as well as land-based applications where water ingress is a problem.

Download Installation Guide

£179.00 ex. VAT

Add to basket Details
BE15 4 station bilge alarm

A rugged and straightforward solution to alerting users of working, military and special use boats to the presence of water in the boat’s bilges, the BE15 is a sealed unit that is easy to install, and provides reassurance on busy active boats.

Download Installation Guide

£269.00 ex. VAT

Add to basket Details
BE16 water ingress four station alarm panel – general purpose

Monitoring up to 4 zones and compatible with Index Marine BE51/BE55 optical and resistive fluid sensors as well as third party sensor types, the BE16 offers low power consumption for indoor stations monitoring water level and other inputs. It is ideal for use in building and infrastructure flood alert systems.

Download Installation Guide

£225.00 ex. VAT

Add to basket Details
BE18 waterproof 4 station alarm panel

Ruggedised and splashproof, the BE18 monitors up to 4 zones and can be used with BE51/BE55 optical and resistive fluid sensors as well as third party sensor types to alert to any combination of water ingress, gas presence, hatch and door security, or many other sensor inputs. This is a robust, versatile alarm panel that serves a wide range of uses in boats, vehicles, architectural and industrial applications.

Download Installation Guide

£249.00 ex. VAT

Add to basket Details
BE20 – water ingress alarm – dual station level alarm

Designed to monitor high or low levels of liquids, the BE20 has two channels with audio alarm and independent annunciator lights. It is ideal for monitoring water ingress in boat bilges and compartments, and buildings and infrastructure in flood-prone areas. Compatible with Index Marine BE51/BE55 optical and resistive fluid sensors as well as many other third party sensor types.

Download Installation Guide

£149.00 ex. VAT

Add to basket Details
BE51 Bilge Water Sensor – Optical Fluid Sensor (10m cable)

With 10m of cable, this optical sensor is compatible with all Index Marine alarm panels, and is safe for use in the presence of volatile gases. An output triggers when the probe becomes immersed in water.

Download Installation Guide

£119.00 ex. VAT

Add to basket Details

Flood and exhaust safety electronic systems

Float switch (1)

Galvanic Isolators (4)

Safety electronic systems – Alarm and Control Panels (7)

Sensors (2)